Shanli 20kVA/16kW Diesel Genset-T2
- Model：16GF
- Genset prime power (PRP)：20KVA/16KW
- Output voltage：400V/230V（Three-phase four-wire system）
- Frequency：50Hz
- Engine model：YC4V35-D20
- Engine prime power： 23kW
- Minimum fuel consumption：≤215(g/kW·h)
Noise(Lp)：≤115 dB(A)
- Net weight：620kg
- Gen-set Size (length*width*height)：1600*650*1050(mm)
Gen-set Brand | Hunan Shanli |
Prime power (PRP) | 20KVA/16KW |
Rated current | 28.8A |
power factor（PF）COSΦ | 0.8 (lagging) |
Steady state voltage variation | ≤±1% |
Steady state Frequency variation | ≤±1% |
Recovery time | ≤3s |
Net weight | 620kg |
Manufacturer | Hunan Shanli Yuchai New Energy Electromechanical Co., Ltd. |
Standby Power | 22KVA/17.6KW |
Output voltage | 400V/230V（Three-phase four wire system） |
Frequency | 50Hz |
Transient voltage variation | +20%~-15% |
Transient Frequency variation | +10%~-7% |
Total Harmonic Distortion（THD） | ≤5% |
Gen-set Size (length*width*height) | 1600*650*1050(mm) |
Engine Brand | Guangxi Yuchai |
Model | YC4V35-D20 |
Bore/stroke | 89*100(mm) |
Total displacement | 2.5L |
Standby Power | 25KW |
Air intake method | Supercharge and intercooling |
Cooling method | Closed loop water cooling |
Fuel System | Direct Injection |
Minimum fuel consumption | ≤215(g/kW·h) |
Oil Consumption | ≤0.5(g/kW·h) |
Noise(Lp) | ≤115dB(A) |
Manufacturer | Guangxi Yuchai Marine and Genset Power Co., Ltd. |
Cylinder arrangement | Straight-four engine |
Compression ratio | 17.5:1 |
Rated speed (RPM) | 1500r/min |
Prime power (PRP) | 23KW |
Starting method | 24V DC start |
Speed regulation mode | mechanical |
Fuel | Light diesel fuel No.0 |
Oil capacity | 7L |
Lubricant Specifications | 15W/40-CD |
Emission Standards | China non-road emission standards Stage II（T2） |
Generator brand | Shanli |
Manufacturer | Hunan Shanli Yuchai New Energy Electromechanical Co., Ltd. |
Model | JSXS-16-4 |
Rated Capacity | 20KVA |
Power Factor | 0.8 |
Rated voltage | 400V |
Voltage regulator | AVR（Automatic Voltage Regulator） |
Protection level | IP22 |
Connection method | Three-phase four wire |
Rated output power | 16KW |
Rated frequency | 50Hz |
Rated speed(RPM) | 1500r/min |
Rated current | 28.8A |
Excitation method | Brushless self-excitation |
Insulation class | H |
Pitch winding | 2/3 |
Single Genset Controller SGC 420（or SGC 120）/Automatic generation controller：AGC 150
- Manufacturer：DEIF A/S
- SGC 120（or SGC 420）The Single Genset Controller has all the functions needed to protect and control the genset, genset breaker and main breaker. The controller also comes with a deep sleep function which stops all standard controller functions when the genset is not running. It helps to extend the life of the battery.
- The display is equipped with full graphic LCD and backlight. You can use the buttons on the controller to start or stop the sequence, and change the operating mode. You can also configure the parameters through the display.
- Numerical values and alarms can be displayed on the LCD screen, and the operator can view and operate easily through the display.
- The controller supports different languages, such as English, Chinese, and Spanish, etc.
- There are two password levels in the controller, which could be set through the controller
- There is an event log in the controller which contains 100 events，and it also contains a real-time clock stamp and engine run time EEPROM, which also can be used for extending the event log.
- Monitor functions: ① Single-phase, two-phase, three-phase, split-phase voltage, frequency, load current, power factor ② Engine safety parameters. For example, engine temperature, oil pressure and fuel level ③ Oil theft alarm ④ Engine battery voltage.
- Control functions: ① Cooling water temperature ② Idle speed ③ Automatic oil pumping
- Protection function (warning and stop machine): which contains reverse power, over current, over voltage, under voltage, over frequency, under frequency, overload, under speed, over speed, load imbalance, low load, phase reversal detection, ECU communication fault, ECU diagnostic light and other functions.
- Operation Mode: The SGC 120 controller contains automatic mode and manual mode.
- Operation mode: In automatic mode, the controller supports the following applications: ①Island ②Auto-start after mains failure (AMF) ③Remote start/stop ④Automatic test. You can also use the automatic start/stop function in automatic mode.
- The controller is equipped with a D+ interface for the charging generator
- Counter functions: ① engine starts times ② engine closing times ③ engine running hours④ Generator and mains power kWh, kVAh, kvarh ⑤ Maintenance
- Communication interface: ① RS-485 interface ② CAN port for engine communication ③ USB interface for connecting to PC
- Protection level: Panel IP65